Black box with a touch screen including an electronic control board
ALFA e-PARTS
We offer our customers a
diagnostic tool for checking
electrical EGR valves and throttle
bodies performance
How does it work?
Once the valve is connected, the tester open and close the valve repeatedly at different speeds. All signals are recorded and compared vs the pattern signal previously set in the tester. At the end, it Will show if the performance is correct or incorrect.
Set of cables to carry out tests
Adapter cables
Instruction manual
It is delivered with support, mat to place the valves, and a feeder. The tester is connected to internet and is updated with new valve reference as new references are added to our catalog.
SIMPLE AND INTUITIVE OPERATION
01.
We select the reference of the EGR or throttle valve to check.
02.
The interface tells us the reference of the cable that we must connect.
03.
When the test is started, the tester performs a series of openings and closings of the valve at different speeds, thus covering all the possibilities of working speed.
04.
During the test, the tester records the sensor position signal over the entire valve path.
05.
This signal is displayed graphically on the screen and is compared to a previously recorded standard signal.
06.
After the comparison, the result obtained is shown on the screen of the tester, to know in a few minutes if the valve has a correct operation.
This Alfa e-Parts tool is an innovation and offers a special technical support to our customers, who can directly check the performance of an EGR valve or throttle body and diagnose a possible fault in the valve system. This will avoid unnecessary procedures for incorrect warranty returns.